Automizer Right-Hand Side Loader

The Automizer™ Right Hand

The Automizer™ Right-Hand side loader features a strong, light-weight body with a reliable loading arm that can reach farther than any other automated side loader.

Parked cars and other obstacles are no longer an obstacle with an arm that can reach 12-feet and lift up to 1,000 pounds fully extended.
Thanks to carefully engineered hydraulics, this arm maneuvers both smoothly and with exacting precision.

Labrie Automizer

Having a smooth operating arm is significantly important when maneuvering in tight spaces; our arm is the smoothest operating arm in the industry today due to its low "mass-in-motion" and "under hopper" inline design. This arm is easy to operate with an electric over hydraulic joystick control; and the Zero-Grab low swing out makes collection in narrow spaces a breeze!




    Automizer Features


    Automizer Right-Hand



    2 axles - 22 yd³ (17 m³)

    3 axles - 31 yd³ (24 m³)

    O.A. length  241" (6,121 mm) 296" (7,518 mm)
    O.A. height above frame  103" (2,616 mm) 103" (2,616 mm)
    O.A. width 96" (2,438 mm) 96" (2,438 mm)
    Tailgate length  18" (457 mm) 33" (838,2 mm)
    Packer stroke  52" (1,321 mm) 52" (1,321 mm)
    Packer height  24" (610 mm) 24" (610 mm)
    Packer width 65" (1,651 mm) 65" (1,651 mm)
    Hopper door width  44" (1,117 mm) 44" (1,117 mm)
    Hopper door height  28" (711 mm) 28" (711 mm)
    Dumping angle, body  45°  45° 
    O.A. length, tailgate raised, body down  294" (7,468 mm) 334"(8,484 mm)
    O.A. height, tailgate raised, body down, above frame  192" (4,877 mm) 192" (4,877 mm)
    O.A. length, dumping position  397" (10,083 mm) 445" (11,303 mm)
    OA height, dumping position, above frame  200" (5,080 mm) 227" (5,766 mm)




    Body floor 8ga AR450 175,000 psi  
    Lower Body side walls 10ga ASTM A1011 GR 80  
    Upper Body side walls 12ga ASTM A1011 GR 80  
    Body roof 12ga ASTM A1011 GR 80  


    2-axle chassis - 20, 22 and 24 yd³  (15, 17 and 18 m³)  
    3-axle chassis - 27, 29, 31, 33, 35 and 37 yd³  (21, 22, 24, 25, 27 and 28 m³)  
    Note: A 3-axle chassis is possible with the small capacities for greater legal payloads.




    Extension "C" rails 2.5" x 4" x 2.5" x 0.5" ASTM  
    Extension "I" beams 5.5" x 2.8125" x 0.75" ASTM  
    Lifting arms 1" ASTM A514  
    Pick up possibilities 32 to 96 gal. Carts 300 gal. & 
    1100 liters    
    Lift capacities 1,000 lbs  1,000 lbs 
    Arm reach 144"  
    Arm cycle time 10 to 18 sec.  




    Pump Dual Vane T6DC  
    Pump flow packer 20.4 gpm @ 700 rpm  
    Pump flow arm 16.3 gpm @ 700 rpm  
    Hydraulic tank 85 gallons  
    Hydraulic system pressure 3,000 psi max.  


    Rails wear plates 0.25" AR500  
    Packer wear shoes 0.25" AR450  
    Top of packing ram 0.25" CSA G40.21 100 QT  
    Face plate of packing ram 0.25" CSA G40.21 100 QT  
    Width of packing ram 65.5"  
    Height of packing ram 24"  
    Stroke of packing ram 48"  



    CNG Ready since 2001

    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.




    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck


    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload


    CNG Ready Trucks







    Brochure & Media

    Automizer Right-Hand


    For more information on the Automizer Right Hand



    Adobe PDF Download our Product Brochure
    Youtube Visit our Youtube Channel

    Dealers & Demos

    Call us for more info


    Dealers in the US

    Distributors in the US

    In Canada

    Distributors in Canada


    International Distributor;

    General Sales & Demos

    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos



Our Trucks

If Your Route Is

Our Certified Dealers

Parts & Service

About Labrie

Contact Us

Latest News

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information